Basement depth = 236 mbsf; Loggers deployed 2010 (IODP Exp 327), recovered 2014 (AT26-18). During July 2013 AT26-03 submersible operations, the large-diameter free-flow valve on the CORK wellhead at Hole U1362A was fully opened for a flowmeter experiment, and the hole produced copious warm fluids for the next year. This is clearly registered by sudden warming of the Onset data loggers that were placed at shallow depths in the hole.

Basement depth = 242 mbsf; Loggers deployed 2010, (IODP Exp 327), recovered 2014, (AT26-18). During July 2011 AT18-07 submersible operations, a large-diameter ball valve on the CORK wellhead at Hole U1362B was fully opened for a flowmeter experiment, and the hole produced copious warm fluids for the next two years. Rapid upflow between 2011 and 2013 is clearly indicated in the Antares thermal records from shallow depths in Hole U1362B, as documented by Neira et al. (2016).

Basement depth = 265.2 mbsf; Loggers deployed 2004 (IODP Exp 301), recovered 2010 (IODP Exp 327). The CORK in Hole U1301B was not properly sealed when installed in 2004, and cold ocean bottom water was drawn down the hole for several years. In July 2009, IODP Expedition 321T (Fisher et al, 2010) returned to Hole U1301B to try to seal it with remedial cementing in the reentry cones. This apparently stopped the downhole flow in Hole U1301B, as is shown by the increase in downhole temperatures recorded at the time and an apparent return to conductive thermal conditions as of Expedition 327 one year later.